Kwame Nkrumah University Of Science And Technology Landmarks Made In Asante Casting

Authors

  • Charles Adu-Boachie Kwame Nkrumah University of Science and Technology
  • Mawuli Kwasi Agbodza Kwame Nkrumah University of Science and Technology
  • Samuel Baah Kissi Kwame Nkrumah University of Science and Technology
  • Ann Abbam Adjaye Kwame Nkrumah University of Science and Technology

DOI:

https://doi.org/10.18533/journal.v9i7.1784

Keywords:

Asante casting, Landmarks, Souvenir item, KNUST, Three dimension

Abstract

Landmarks are essential geographical features that give easy identification to a specific location. Although landmarks serve very important purpose, most of these landmarks could only been seen at the site they are found. These landmarks can be made handy as souvenir items which will intend advertise and showcase the beauty of these landmarks. The Kwame Nkrumah University of Science and Technology has a wide array of souvenirs already available for purchase and distribution. However most of them lack originality and a deeper sense of connection to the prestigious university.  These souvenir items can be produced using the Asante casting technique depicting the various landmarks in KNUST. This research is qualitative and employs studio base research design for the execution of the project. It was found that during periods of increase in rainfall, P.O.P. moulds serve as the best investment material because it dries and hardens quickly. Also, the addition of sand to the mould material (P.O.P.) cost efficient and durable. It is recommended that, technology such drones can be used to capture bird’s view of very large landmarks to improve designs and also to come up with detailed designs within a short period of time, three dimensional computer aided software can be used.

Author Biographies

  • Charles Adu-Boachie, Kwame Nkrumah University of Science and Technology
    Department of Industrial Art, Lecturer.
  • Mawuli Kwasi Agbodza, Kwame Nkrumah University of Science and Technology
    Department of Industrial Art, Teaching Assistant.
  • Samuel Baah Kissi, Kwame Nkrumah University of Science and Technology
    Department of Industrial Art, Lecturer.
  • Ann Abbam Adjaye, Kwame Nkrumah University of Science and Technology
    Department of Industrial Art, Teaching Assistant.

References

Agyen-Gyasi, K., 2011, The Ghana Collection at the Kwame Nkrumah University of Science and Technology Library. Information Development, 27(1), pp.66-73.

Booker, D., 2018, Looking for Landmarks: Working at the Same Time, The Rosen Publishing Group, Inc, New York.

Cave, J. and Jolliffe, L. eds., 2013. Tourism and souvenirs: Glocal perspectives from the margins (Vol. 33). Channel View Publications.

Corrigan, P., 1997, The Sociology of Consumption: An Introduction, SAGE Publications, California.

Ellis, W.O., 2011. State of the University Address to Convocation.

Goldstein, B., B., 2012, The Importance of Landmarks, viewed 1 August 2019 from http://ezinearticles.com/?The-¬Importance-¬of-¬Landmarks&id=7281257.

Golledge, G., R., 2002, The Nature of Geographic Knowledge, Annals of the Association of American Geographers. 92. 1 - 14.

Hume, D., 2013, Tourism Art and Souvenirs: The Material Culture of Tourism an introduction, Routledge, London.

Kissi, S.B., 2011. Evaluation of bees wax and core materials for traditional lost wax casting (Doctoral dissertation).

Kissi, S.B., Fening, P.A. and Adom, D., 2016. Beeswax in Asante Castings: The Then, Now and the Way Forward. Journal of Arts and Humanities, 5(10), pp.07-22.

Lasusa, M., D., 2007, ‘Eiffel Tower key chains and other pieces of reality: The philosophy of souvenirs’, The Philosophical Forum. 38. 271 - 287.

Mensah, E.E. & Oppong-Adjei, K., 2017, ‘Selected landmarks of KNUST in three dimensional souvenirs’, Undergraduate thesis, Dept. of Industrial Art, Kwame Nkrumah University of Science and Technology.

Morgan, N. & Pritchard, A., 2005, ‘On souvenirs and metonymy: Narratives of memory, metaphor and materiality’, Tourist Studies, 5(1), pp. 29–53.

Paraskevaidis, P. & Andriotis, K., 2015, Values of souvenirs as commodities. Tourism Management, International Journal of Tourism Management. 48. 1-10.

Ramana Rao, T., V., 2007, Metal Casting: Principles And Practice, New Age International (P) Limited, Publishers, New Delhi.

Ramsay, N., 2009, ‘Taking-place: Refracted Enchantment and the Habitual Spaces of the Tourist Souvenir’, Social & Cultural Geography - SOC CULT GEOGR. 10. 197-217.

Smith-Asante, E. (2016) ‘Biography of Ghana’s first President, Dr. Kwame Nkrumah’, Graphic Online, 08 March. Available at: https://www.graphic.com.gh/news/general-news/biography-of-ghana-s-first-president-dr-kwame-nkrumah.html (Accessed: 02 August 2019).

Swanson, K., 2014, Souvenirs, Tourists, and Tourism, in Lew, A., A., Hall, C., M., & Williams, A., M., The Wiley Blackwell Companion to Tourism, pp.179-188, Wiley Blackwell Publishers, New Jersey.

Swanson, K., K. & Timothy, D., J., 2012, 'Souvenirs: Icons of meaning, commercialization and commoditization' Tourism Management, vol. 33, no. 3, pp. 489-499.

Thompson, F., Hannam, K., Petrie, K., 2012, ‘Producing ceramic art works through tourism research’, Annals of Tourism Research, vol. 39, no. 1, pp. 336-360.

Tsuji, B., Lindgaard, G. & Parush, A., 2005, Landmarks for navigators who are visually impaired.

Wilkins, H., 2011, ‘Souvenirs: What and Why We Buy’, Journal of Travel Research, 50(3), pp. 239–247.

ZSM (2008), Peace Pole, Kumasi, Ghana, Wikimedia Commons, viewed 2nd August 2019, https://commons.wikimedia.org/wiki/File:Peace_Pole,_Kumasi,_Ghana.jpg.

ZSM (2011), KNUST main entrance with Kwame Nkrumah Memorial Park, Wikimedia Commons, viewed 2nd August 2019, https://commons.wikimedia.org/wiki/File:KNUST_main_entrance_with_Kwame_Nkrumah_Memorial_Park.jpg.

Downloads

Published

2020-07-29

Issue

Section

Article

Similar Articles

21-30 of 40

You may also start an advanced similarity search for this article.