Beeswax in Asante Castings: The Then, Now and the Way Forward

Authors

  • Samuel Baah Kissi KWAME NKRUMAH UNIVERSITY OF SCIENCE AND TECHNOLOGY
  • Peggy Ama Fening
  • Dickson Adom

DOI:

https://doi.org/10.18533/journal.v5i10.984

Keywords:

Asante casting, Beeswax, Cement mould, Lost wax casting, Plaster of Paris mould.

Abstract

Beeswax used for Asante casting by Krofofrom artisans and the Asantehene gild of metalsmiths in the 1700`s are extracted naturally without further chemical treatment to enhance their workability. Although modelling with this wax is very effective, mass production technique now adopted by local artisans and the inflow of machine made artefacts due to globalization has crippled the sale of locally manufactured artefacts. This research dives into various ways of manipulating the natural beeswax using conventional waxes to help achieve complex and competitive designs suitable for the international feed. Qualitative research design approach was used and the descriptive and experimental research methodologies were employed. A comparative analysis was conducted on the production processes employed in the 1700`s and those practiced by various cultures in Africa and experiment was conducted on beeswax to ascertain a suitable wax formulation for the production of complex shapes and sizes using simple Jewellery technique less employed by local metal artisans for casting. It was found that the addition of various additives to the beeswax improved its workability and also the use of Plaster of Paris in wax modelling should be adapted as used in this research for traditional mass production for maximum yield and less stress.

Author Biographies

  • Samuel Baah Kissi, KWAME NKRUMAH UNIVERSITY OF SCIENCE AND TECHNOLOGY

    LECTURER

    DEPARTMENT OF INDUSTRIAL ART

  • Peggy Ama Fening

    Lecturer, Department of Industrial Art, KNUST-Kumasi. Ghana

  • Dickson Adom

    PhD candidate, Department of General Art Studies, KNUST-Kumasi. Ghana

References

Aichholz & Lorbeer (1996). Investigation of Comb Wax of Honeybees http://en.wikipedia.org. Retrieved on the 4th of February, 2011.

Apley A. (2009), African lost Wax Casting: The Tada figure, www.metmuseum.org. Retrieved on the 26th of April, 2010.

Apley A. (2000), African Lost Wax Casting. Metropolitan Museum of Art. www.metmuseum.org/toah/hd/wax/hd-wax.hmt. Retrieved on the 26th of April, 2010.

Garrard F.T. (1980), Akan weights and the Gold trade, Longman group Ltd. London and N.Y, p.209.

Garrard F.T. (1986), “Introduction” In Asante Brass Casting. Cambridge African Studies Center, p11.

Gupta P.R.B. (1983), Foundry Engineering. Tech India Publication, pp.19, 154 to157

Kallenberg L. (1981), Modeling in Wax for Jewellery and Sculpture. Chilton Book Company. USA.

Kissi, S.B. (2011), Evaluation of Bees Wax and Core Materials for Traditional Lost Wax Casting. M.F.A Thesis, KNUST: Kumasi

Martha E. (1989), Early Akan Gold. African Arts, Vol 22, p.87

Rattray R.S. (1923), Religion and Art in Ashanti, London, OVP, p296

Rattray R.S. (1927), Religion and Art in Ashanti, Oxford University Press, p.311

Ross, D.H. (1977), The Iconography of Ashanti Sword Ornament. California: African Art, African Studies Center. University of California.

Sias R.F. (2005), Lost-Wax Casting Old, New and Inexpensive Method. South Carolina, Woodsmere Press, Pendleton

Silverman R. (1990), All that`s Gold Does Not Glitter. African Art (UCLA) p.76

University of Missouri’s Museum of Anthropology (2011), Journal of Metallurgy, Museum of Anthropology. College of Art and Science. University of Missouri. www.anthromuseum.missouri.edu. On the 9th of March, 2011

Victor. E.R, Willard .J.M, Oswald .A.L (1990), Metal work Technology and Practice, McKnight Publication Company, Bloomington, Illinois, pp.266 to 280

Waters L. (Turkington) (1993), Lost Wax Casting in Ashanti, KNUST.

www.tech-faq.com/casting (2010). Retrieved on the 27th of January, 2011

Downloads

Published

2016-10-20

Issue

Section

Article

Similar Articles

21-30 of 34

You may also start an advanced similarity search for this article.